- Home
- / LightAlarms
-
/ LightAlarms 720W Surface Mount Interruptible Mini Inverter, LMIU-720

LightAlarms 720W Surface Mount Interruptible Mini Inverter, LMIU-720
- ROCK SKU: LIG-LMIU-720
- MFG Part #: LMIU-720
$3,350.77
Estimated Lead Time: 0-2 weeks
The LightAlarms The LightAlarms LMIU-720 is a 720W surface mount interruptible mini inverter (unit equipment) with a high efficiency pure sine wave inverter and two 12V VRLA batteries that provide 90 minutes of emergency operation. The standard unit runs 120V in/120V out or 277V in/277V out, includes non-audible improved self-diagnostics, and has one output circuit.
- Product: Interruptible unit equipment, standard with non-audible Improved Diagnostics self-testing circuitry, 720W
- Housing: 16 gauge steel on the standard unit (14 gauge steel applies to 4 output circuit units)
- Housing: White semi-gloss powder coat paint finish
- Mounting: Surface mount
- Load capacity: 720W
- Load capacity: Line voltage allows remote mounting of the emergency fixtures at distances up to 1000 feet
- Compatible loads: LED, incandescent and fluorescent
- Compatible loads: Operates switched, normally-on or normally-off fixture types
- Compatible loads: Incandescent, LED and fluorescent lamp and ballast combinations, including triac dimmable ballasts; consult factory for DALI dimming
- Compatible loads: Consult the factory when using high bay fixtures or screw-in type LED lamps
- Electronics: High efficiency pure sine wave inverter
- Electronics: Temperature compensated charger
- Electronics: Replaceable charger output fuse protection
- Electronics: Low battery voltage disconnect
- Electronics: Electronic lockout and brownout circuits (standard)
- Controls: Standard non-audible improved self-diagnostics (base MPN, diagnostic field blank)
- Controls: Non-audible Improved Diagnostics and self-testing microcontroller-based system (standard)
- Controls: Improved self-diagnostics require a minimum load of 10% of unit capacity
- Controls: Standard lighting control override for 0-10V dimming systems
- Circuits: One output circuit (base MPN, circuit field blank)
- Battery: Sealed maintenance-free 12V oversized valve regulated lead-calcium (VRLA) battery
- Battery: Provides 90 minutes of emergency operation
- Battery: Two batteries; replacement battery 2X 860.0096-L
- Power requirements: Choice of 120V in/120V out or 277V in/277V out operation, 60Hz
- Emergency power: Emergency power available for load: 720W at 90 minutes, 480W at 2H, 360W at 3H, 270W at 4H; AC specs 9.60 / 4.00 Amps at 120 / 277VAC
- Specifications: Transfer time less than 1 second; voltage regulation in emergency +/- 5%; frequency regulation in emergency 60 Hz +/- 1%
- Specifications: Inverter power factor range: 0.8 leading to 0.8 lagging at 120V; 0.9 leading to 0.9 lagging at 277V
- Specifications: Operating temperature 68°F to 86°F (20°C to 30°C)
- Cabinet: Standard (LMIU-720) wall installation: 25.6" W x 20" H x 7.5" D; 2 batteries; 180 lbs with batteries, 65 lbs without; pure sine wave
- Ordering options: Suffix options: -ID audible improved self-diagnostics, -NID no improved self-diagnostics, -NEXRF Nexus wireless, -NEXP Nexus Pro IoT, -4 four output circuits, -4-LD four output circuits with load shedding for 0-10V models, -D3 15-minute time delay, -SAC service alarm contact
- Ordering options: When using a transfer device (automatic load control relay) the NID option must be chosen
- Approvals: UL 924
- Approvals: Meets or exceeds all National Electric Code and Life Safety Code emergency lighting requirements
- Warranty: Battery: 3 year full, plus 7 year pro-rata warranty (subject to proper installation and maintenance)
- Warranty: Unit: three year warranty
| Wattage | 720W |
| Voltage | 120V / 277V |
| Battery | 2 x 12V VRLA, 90 min |
| Emergency Duration | 90 minutes |
| Transfer Time | Less than 1 second |
| Approvals | UL 924 |
| Warranty | 3 year unit; battery 3 year full + 7 year pro-rata |
| Dimensions | 25.6" W x 20" H x 7.5" D |
Returns
- Returns accepted within 30 days of purchase, in original unopened packaging, unused and in resalable condition.
- All returns require prior authorization — email info@rocklighting.com before shipping anything back.
- Approved returns are subject to a 25% restocking fee, deducted from the refund.
- No restocking fee when the problem is ours — damaged, defective, wrong item shipped, or an inaccurate listing.










