- Home
- / LightAlarms
-
/ LightAlarms 250W Surface Mount Interruptible Mini Inverter, LMIU-250

LightAlarms 250W Surface Mount Interruptible Mini Inverter, LMIU-250
- ROCK SKU: LIG-LMIU-250
- UPC: 784170137864
- MFG Part #: LMIU-250
$1,418.46
Estimated Lead Time: 0-2 weeks
The LightAlarms The LightAlarms LMIU-250 is a 250W surface mount interruptible mini inverter (unit equipment) with a high efficiency pure sine wave inverter and two 12V VRLA batteries that provide 90 minutes of emergency operation. The standard unit runs 120V in/120V out or 277V in/277V out and includes non-audible improved self-diagnostics.
- Product: Interruptible unit equipment, standard with non-audible improved self-diagnostics circuitry, 250W
- Housing: 14 gauge steel
- Housing: White semi-gloss powder coat paint finish
- Mounting: Surface mount
- Load capacity: 250W
- Load capacity: Line voltage allows remote mounting of the emergency fixtures at distances up to 1000 feet
- Compatible loads: LED, incandescent and fluorescent
- Compatible loads: Operates switched, normally-on or normally-off fixture types
- Compatible loads: Incandescent, LED and fluorescent lamp and ballast combinations, including triac dimmable ballasts; consult factory for DALI dimming
- Compatible loads: Consult the factory when using high bay fixtures or screw-in type LED lamps
- Electronics: High efficiency pure sine wave inverter
- Electronics: Temperature compensated charger
- Electronics: Replaceable output fuse protection
- Electronics: Low battery voltage disconnect
- Electronics: Electronic lockout and brownout circuits (standard)
- Controls: Standard non-audible improved self-diagnostics (base MPN, diagnostic field blank)
- Controls: Non-audible self diagnostic/charger is a fully self-contained, fully automatic microcontroller-based system
- Controls: Improved self-diagnostics require a minimum load of 10% of unit capacity
- Controls: Standard lighting control override for 0-10V dimming systems
- Battery: Sealed maintenance-free 12V oversized valve regulated lead-calcium (VRLA) battery
- Battery: Provides 90 minutes of emergency operation
- Battery: Two batteries; replacement battery part 2X 860.0024-L
- Power requirements: Choice of 120V in/120V out or 277V in/277V out operation, 60Hz
- Emergency power: Emergency power available for load: 250W at 90 minutes, 167W at 2H, 125W at 3H, 94W at 4H; AC specs 2.75 / 1.20 Amps at 120 / 277VAC (non-CEC model)
- Load capacity: Mini inverter at 80% capacity in emergency mode: 200W at 120V; at 70% capacity: 175W at 277V
- Specifications: Transfer time less than 1 second; voltage regulation on emergency +/- 5%; frequency regulation on emergency 60 Hz +/- 1%
- Specifications: Load power factor range 0.9 leading to 0.9 lagging
- Specifications: Operating temperature 68°F to 86°F (20°C to 30°C)
- Cabinet: Wall installation: 27" W x 12.2" H x 7.3" D; 2 batteries; 100 lbs with batteries, 45 lbs without; pure sine wave
- Ordering options: Suffix options: -ID audible improved self-diagnostics, -NID no self-diagnostics, -NEXP Nexus Pro IoT, -NEXRF Nexus wireless, -D3 15-minute time delay, -LDC25 load shedding to 25% brightness, -LDC45 load shedding to 45% brightness, -SAC service alarm contact, -CEC CEC Title 20 for California
- Ordering options: When using a transfer device (automatic load control relay) the NID option must be chosen
- Approvals: UL 924
- Approvals: Meets or exceeds all National Electric Code and Life Safety Code emergency lighting requirements
- Approvals: CEC Title 20 for California is the -CEC suffix; the base LMIU-250 is the non-CEC model
- Warranty: Battery: 3 year full, plus 7 year pro-rata warranty (subject to proper installation and maintenance)
- Warranty: Unit: three year warranty
| Wattage | 250W |
| Voltage | 120V / 277V |
| Battery | 2 x 12V VRLA, 90 min |
| Emergency Duration | 90 minutes |
| Transfer Time | Less than 1 second |
| Approvals | UL 924 |
| Warranty | 3 year unit; battery 3 year full + 7 year pro-rata |
| Dimensions | 27" W x 12.2" H x 7.3" D |
Returns
- Returns accepted within 30 days of purchase, in original unopened packaging, unused and in resalable condition.
- All returns require prior authorization — email info@rocklighting.com before shipping anything back.
- Approved returns are subject to a 25% restocking fee, deducted from the refund.
- No restocking fee when the problem is ours — damaged, defective, wrong item shipped, or an inaccurate listing.










