• Home
  • / LightAlarms
  • / LightAlarms 400W Surface Mount Interruptible Mini Inverter, LMIU-400

LightAlarms LMIU-400 400w surface mount interruptible mini inverter

LightAlarms 400W Surface Mount Interruptible Mini Inverter, LMIU-400

$2,181.54

Estimated Lead Time: 0-2 weeks

The LightAlarms The LightAlarms LMIU-400 is a 400W surface mount interruptible mini inverter (unit equipment) with a high efficiency pure sine wave inverter and two 12V VRLA batteries that provide 90 minutes of emergency operation. The standard unit runs 120V in/120V out or 277V in/277V out and includes non-audible improved self-diagnostics.

  • Product: Interruptible unit equipment, standard with non-audible improved self-diagnostics circuitry, 400W
  • Housing: 14 gauge steel
  • Housing: White semi-gloss powder coat paint finish
  • Mounting: Surface mount
  • Load capacity: 400W
  • Load capacity: Line voltage allows remote mounting of the emergency fixtures at distances up to 1000 feet
  • Compatible loads: LED, incandescent and fluorescent
  • Compatible loads: Operates switched, normally-on or normally-off fixture types
  • Compatible loads: Incandescent, LED and fluorescent lamp and ballast combinations, including triac dimmable ballasts; consult factory for DALI dimming
  • Compatible loads: Consult the factory when using high bay fixtures or screw-in type LED lamps
  • Electronics: High efficiency pure sine wave inverter
  • Electronics: Temperature compensated charger
  • Electronics: Replaceable charger output fuse protection
  • Electronics: Low battery voltage disconnect
  • Electronics: Electronic lockout and brownout circuits (standard)
  • Controls: Standard non-audible improved self-diagnostics (base MPN, diagnostic field blank)
  • Controls: Non-audible self diagnostic/charger is a fully self-contained, fully automatic microcontroller-based system
  • Controls: Improved self-diagnostics require a minimum load of 10% of unit capacity
  • Controls: Standard lighting control override for 0-10V dimming systems
  • Battery: Sealed maintenance-free 12V oversized valve regulated lead-calcium (VRLA) battery
  • Battery: Provides 90 minutes of emergency operation
  • Battery: Two batteries; replacement battery part 2X 860.0043-L
  • Power requirements: Choice of 120V in/120V out or 277V in/277V out operation, 60Hz
  • Emergency power: Emergency power available for load: 400W at 90 minutes, 300W at 2H, 200W at 3H, 150W at 4H; AC specs 4.60 / 2.00 Amps at 120 / 277VAC (non-CEC model)
  • Specifications: Transfer time less than 1 second; voltage regulation on emergency +/- 5%; frequency regulation on emergency 60 Hz +/- 1%
  • Specifications: Inverter power factor range: 0.8 leading to 0.8 lagging at 120V; 0.9 leading to 0.9 lagging at 277V
  • Specifications: Operating temperature 68°F to 86°F (20°C to 30°C)
  • Cabinet: Wall installation: 24" W x 20" H x 10.5" D; 2 batteries; 150 lbs with batteries, 65 lbs without; pure sine wave
  • Ordering options: Suffix options: -ID audible improved self-diagnostics, -NID no self-diagnostics, -NEXRF Nexus wireless, -NEXP Nexus Pro IoT, -D3 15-minute time delay, -SAC service alarm contact, -4 four output circuits, -4-LD four output circuits with load shedding for 0-10V fixtures, -CEC CEC Title 20 for California
  • Ordering options: When using a transfer device (automatic load control relay) the NID option must be chosen
  • Approvals: UL 924
  • Approvals: Meets or exceeds all National Electric Code and Life Safety Code emergency lighting requirements
  • Approvals: CEC Title 20 for California is the -CEC suffix; the base LMIU-400 is the non-CEC model
  • Warranty: Battery: 3 year full, plus 7 year pro-rata warranty (subject to proper installation and maintenance)
  • Warranty: Unit: three year warranty

Wattage 400W
Voltage 120V / 277V
Battery 2 x 12V VRLA, 90 min
Emergency Duration 90 minutes
Transfer Time Less than 1 second
Approvals UL 924
Warranty 3 year unit; battery 3 year full + 7 year pro-rata
Dimensions 24" W x 20" H x 10.5" D

Returns

  • Returns accepted within 30 days of purchase, in original unopened packaging, unused and in resalable condition.
  • All returns require prior authorization — email info@rocklighting.com before shipping anything back.
  • Approved returns are subject to a 25% restocking fee, deducted from the refund.
  • No restocking fee when the problem is ours — damaged, defective, wrong item shipped, or an inaccurate listing.

Return & Refund Policy · 323-419-5591

Ask a Lighting Expert

Request for Quote

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)